McMaster

McMaster-Carr18-8不锈钢螺纹锥销92284A280无锡市阿曼达机电有限公司主要经营McMaster-Carr,McMaster-Carr 销子 92284A280 阿曼达

品牌：McMaster-Carr
型号：92284A280?（多款型号价格可选）
? ? ? 18-8不锈钢螺纹锥销
销号4，0.248“大端直径，3/4”长
违约
5包
添加到订单?
有现货的
92284A280
销式锥度
端型平面
头型螺纹
轴式锥形
圆形端部形状
测量系统英寸
材料18-8不锈钢
4号别针
大端直径0.248”
大端直径公差-0.0007“至0.0013”
长度3/4”
小端直径0.232”
每12“锥度为1/4”
螺纹长度3/8”
螺纹尺寸1/4“-28
最小洛氏硬度B90
断裂强度54000磅/平方英寸
钝化未钝化
包括六角螺母
符合RoHS.

McMaster-Carr18-8不锈钢螺纹锥销92284A280这些销上的螺纹突出，便于从盲孔中取出。
拧紧六角螺母以拔出销。
通常用于定位部件和固定组件，它们以均匀的速率锥形以适合锥形孔。
使用与销号匹配的锥形钻头，以实现舒适贴合。
它们有轻微的圆形边缘，有助于插入。

断裂强度以单剪的形式测量，这是将销断裂成两块所需的力。

18-8不锈钢销提供了强度和耐腐蚀性的平衡。
它们可能有轻微的磁性。

18-8 Stainless Steel Threaded Taper Pin
Pin Number 4, 0.248" Large End Diameter, 3/4" Long
92284A280
Pin Type Taper
End Type Plain
Head Type Threaded
Shaft Type Tapered
End Shape Rounded
System of Measurement Inch
Material 18-8 Stainless Steel
Pin Number 4
Large End Diameter 0.248"
Large End Diameter Tolerance -0.0007" to 0.0013"
Length 3/4"
Small End Diameter 0.232"
Rate of Taper 1/4" per 12"
Thread Length 3/8"
Thread Size 1/4"-28
Min. Hardness Rockwell B90
Breaking Strength 54,000 lbs./sq. in.
Passivation Not Passivated
Includes Hex Nut
RoHS Compliant
Threads on these pins stick out for easy removal from blind holes. Tighten the hex nut to draw the pin out. Often used for positioning components and securing assemblies, they taper at a uniform rate to fit in tapered holes. Use a tapered drill bit that matches the pin number for a snug fit. They have slightly rounded edges to aid insertion.
Breaking strength is measured as single shear, which is the force required to break the pin into two pieces.
18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.

如因作品内容、版权和其它问题需要同本网联系的，联系邮箱：pitechan@foxmail.com。