型号:Number RS- RSD模体?
厂家:美国RSD公司,?Radiology Support Devices
人型,
头骨周围塑造,
检查的重要物理参数,
提供真实系统检测,
理想的训练工具,
以聚碳酸酯作为构成材料方便平行或纵轴垂直.
A部分:铝合金板..毫米厚.在一个度角的设置下.测量光束宽度和切片厚度.
B部分:该剂量部分.提供病人曝光控制.实际病人扫描前内部异常剂量检查.能够满足TLD的相应的要求.
C部分:圆柱瘤建立分级大小和高密度分辨率.低对比度分辨率和显示部分束平均影响.
D部分:模拟人的部分提供了实际听小骨在有空气对比的内耳.和在有断裂的骨头.小肿瘤后颅窝被放置在一个地方.这个地方许多扫描都存在困难.
E部分:直径为/-in的铝杆位于模体的纵轴线.检查一般路线对齐.和[干水[给出了一个真实的[噪声检查".
| ? | Computed Tomography Head Phantom. | ? |
| Anthropomorphic Molded Around Skull Checks Important Physical Parameters Provides Realistic System Check Ideal For Training Polycarbonate Base Dimensioned For Scans Parallel or Perpendicular to Longitudinal Axis SECTION A:?Aluminum plates, .mm thick, set at a ° angle, measure beam width and slice thickness. SECTION B:?The dosimetry section provides patient-exposure controls, and checks on abnormal internal doses before actual patient scans. Customization to accommodate TLD with rods or chips is available. SECTION C:?Cylindrical tumors of graded sizes and radiodensities establish high and low-contrast resolution and demonstrate partial beam-averaging effects. SECTION D:?The anthropomorphic section provides actual auditory ossicles in an air-contrast inner ear and a fractured petrous bone. Small tumors in the posterior fossa are placed in an area which most scanners image with difficulty. SECTION E:?/ Inch diameter aluminum rod on the phantom's longitudinal axis, checks general alignment, and "DryWater" gives a realistic "noise check." |
| | | |

如因作品内容、版权和其它问题需要同本网联系的,联系邮箱:pitechan@foxmail.com。
上一篇: 装置德国fag轴承的注意事项
厂家直销铝合金桁架.TRUSS架.背景架桁架 |
SKKT/E |
陶瓷喷绘机哪里有卖 |
山西BQF |
铸铝.精密铸造厂家 |
光缆挂钩 |
热转印烤杯机/热转印设备烤杯机 |
中空注浆锚杆 |
保定市精密钢管代理销售商家 |
山西晋中灌浆料厂家/山西晋中灌浆料厂家/山西晋中灌浆料价格 |
矿用振动筛在运行中出现故障带来的损失 |
旋转吊环可非标定做 |
美鹰牌刀切馒头机 馒头整形输送机厂家直销 |
供应河南升降机.河南升降平台.河南升降货梯 |
隔振器.耐高温隔振器.化工厂用隔振器 |
苏州喷塔淋 苏州喷塔淋安装 苏州喷塔淋厂家 |
蛐蚊弹簧吸尘管/机床包塑软管 |
承德市汽柴油防负压阀 |
高温耐热输送设备标准链条(广州深圳佛山东莞等地) |
苏州折叠门 |
Anthropomorphic Molded Around Skull Checks Important Physical Parameters Provides Realistic System Check Ideal For Training Polycarbonate Base Dimensioned For Scans Parallel or Perpendicular to Longitudinal Axis